The Premier
LiFePO4 Battery
For Australian
On & Off-Grid.

100Ah of Capacity and Operating At 51.2V,
With True 1C Charge & Discharge Capabilities.

Safebatt Pro 51.2V

The ultimate lithium ferro battery for seamless on and off-grid applications. With 100Ah capacity and operating at 51.2V, its prismatic cell design allows for individual monitoring, ensuring precise management of energy usage for optimal performance.

Safebatt Pro 12.8V

The SafeBatt Pro 12.8V model contains a 400A BMS, set to 314Ah allowing a true 1C discharge. Additionally it has CANBUS and Wifi Communications.

Features

True 1C Charge & Discharge Capability

SafeBatt Pro batteries are a 16s Prismatic single cell, 51.2V, 100Ah, independent BMS battery with configurations not seen in Australia.

Discharged & Charged into a Single Cell

First of all SafeBatt is a 1C battery at 100Ah, meaning 100Ah can be both discharged and charged into a single cell without issue. This is something less commonly seen in the market.

Unique BMS feature

The next unique feature is the BMS. The BMS is built to always act in the interest of safety as is not reliant on a connection to an inverter, however when connected with an inverter easily transmits endless data of CANBUS to further increase installation feedback.

Pro 51.2V Specifications

Specifications

Battery Dimensions
430 (L) × 442 (W) × 135 (H)
Weight
44kg
Nominal Voltage
51.2v
Nominal Ah
100Ah
Nominal KwHr
5.12kwHr
Chemistry
LiFeP04 (LFP)
Cell Structure
Prismatic
Charge/Discharge Rate
1C (100A) (0.5C by Default)
Maximum Modules
32
DC Circuit Breaker
1P 125A
Communications
RS485/CAN (Victron Supported)
Termination
Touch Safe Connector
Temperature Range
-20-55 Degrees C
Warranty
12months + Additional 5 Years if system is accessible online (as per T&C’s)
BMS
Short Circuit, Over Current, Over Voltage, Low Voltage, High Temperature, Low Temperature, Cell Balance

Safebatt Wall

SafeBatt is an advanced rechargeable lithium-ion battery engineered for both residential and commercial energy storage needs.

Designed with a compact, wall-mounted profile, SafeBatt seamlessly integrates with solar panel systems to capture and store surplus energy generated during peak production periods.

This stored energy can then be utilised during times of low sunlight or grid outages, ensuring uninterrupted power supply and enhancing energy self-sufficiency.

Safebatt Lite

The ultimate LiFePO4 for seamless off-grid applications. With 300Ah capacity and operating at 12.8V, its prismatic cell design allows for individual monitoring, ensuring precise management of energy usage for optimal performance.

SPEC COMPARISON

Safebatt LITE 12.8V

Nominal Voltage
12.8V
Cell Capacity
314Ah
Usable Capacity
300Ah
Maximum Discharge Current
200A (0.63C)
Bluetooth
Yes
Wifi
No
RS485 / CANBUS Comms
No
Series Config
No
Parallel Config
yes
Balancing
Passive
Warranty Period
5 Years
Assembly Method
Bolt / Cable
AS IEC62619 Conformity
Cell and Assembly
AS3001 Compliant
Yes
Australian Made
Yes

Safebatt PRO 12.8V

Nominal Voltage
12.8V
Cell Capacity
314Ah
Usable Capacity
300Ah
Maximum Discharge Current
314A (1C)
Bluetooth
Yes
Wifi
Yes
RS485 / CANBUS Comms
Yes
Series Config
Yes
Parallel Config
yes
Balancing
Active
Warranty Period
5 Years, 10 Years if registered and online
Assembly Method
Laser Weld / Flexible Busbars
AS IEC62619 Conformity
Cell and Assembly
AS3001 Compliant
Yes
Australian Made
Yes

SafeGen

> Canopy design integrated single solar panel, ito keep battery charged

> Dynamic measurement of connected loads for optimized power delivery

> Intelligent voltage output control

> Remote fuel monitoring with automated refueling capabilities